|
關注：1
2013-05-23 12:21
求翻譯：對于換用新的模具，或用新的操作工藝時，需重新編寫程序，重新設定位置參數，從而使機械手按新的要求動作運行。主要步驟為：工藝編寫，位置設定，輔助功能設定，運行操作等內容是什么意思？ 待解決
 懸賞分：1
- 離問題結束還有
對于換用新的模具，或用新的操作工藝時，需重新編寫程序，重新設定位置參數，從而使機械手按新的要求動作運行。主要步驟為：工藝編寫，位置設定，輔助功能設定，運行操作等內容
問題補充： |
|
2013-05-23 12:21:38
Change with the new mold, or a new operating process, the need to re-programming, re-set the positional parameters, so the robot according to the new requirements for action to run. Main steps: the process to write, location settings, accessibility settings, run the operation
|
|
2013-05-23 12:23:18
For switched to a new Mold, or a new operating process, you need to write a program to re-set location parameters, so that the requirements under the new robot motion. Key steps: Process for preparing, and location is set, the accessibility settings, run the operation, content
|
|
2013-05-23 12:24:58
Regarding uses in exchange the new mold, when or with new operation craft, must compile the procedure, establishes the location parameter, thus causes the manipulator according to the new request movement movement.The main step is: Craft compilation, position hypothesis, auxiliary function hypothesi
|
|
2013-05-23 12:26:38
Swapped with a new mold, or when an operation with a new process, rewrite the program you want, reset the location parameter, so that the robot actions run according to new requirements. Main steps are: process writing, position, accessibility settings, run operations such as content
|
|
2013-05-23 12:28:18
正在翻譯，請等待...
|
湖北省互聯網違法和不良信息舉報平臺 | 網上有害信息舉報專區 | 電信詐騙舉報專區 | 涉歷史虛無主義有害信息舉報專區 | 涉企侵權舉報專區
