|
關注：1
2013-05-23 12:21
求翻譯：采用SEM和XRD研究了燒結溫度和時間對油墨釉層表面析晶、表面形貌及其對釉層光澤度和耐酸性的影響,確定了油墨的最佳燒結溫度和燒結時間分別為660 oC和4 min.是什么意思？ 待解決
 懸賞分：1
- 離問題結束還有
采用SEM和XRD研究了燒結溫度和時間對油墨釉層表面析晶、表面形貌及其對釉層光澤度和耐酸性的影響,確定了油墨的最佳燒結溫度和燒結時間分別為660 oC和4 min.
問題補充： |
|
2013-05-23 12:21:38
Sintering temperature and time on the ink enamel surface crystallization, surface morphology and its ink gloss glaze layer and acid resistance, determine the optimum sintering temperature and sintering time were 660 oc and using sem and xrd 4 min.
|
|
2013-05-23 12:23:18
With SEM XRD research and the sintering temperature and time for ink crystal glaze surface analysis, surface appearance of the glaze layer and its gloss and acids, determine the ink of the sintering temperature and sintered best for 660 and 4 min oC .
|
|
2013-05-23 12:24:58
Used SEM and XRD has studied the agglutination temperature and the time to the printing ink glaze level surface crystallization, the superficial appearance and to the glaze level glossiness and the acid resistant influence, had determined the printing ink best agglutination temperature and the agglu
|
|
2013-05-23 12:26:38
Using SEM and XRD study on sintering temperature and time on ink crystallization of glazed surfaces, surface topography and its effect on acid resistance of enamel layer of gloss and, determine the best temperature of sintering and sintering time ink 660 oC and 4 min, respectively.
|
|
2013-05-23 12:28:18
正在翻譯，請等待...
|
湖北省互聯網違法和不良信息舉報平臺 | 網上有害信息舉報專區 | 電信詐騙舉報專區 | 涉歷史虛無主義有害信息舉報專區 | 涉企侵權舉報專區
