|
關注：1
2013-05-23 12:21
求翻譯：交聯度越低（摩爾交聯度低于10%），DMAEMA的共聚成球性能越差，甚至得不到球形樹脂。致孔劑對樹脂制備亦有很大影響，在無致孔劑時，DMAEMA與TRIM共聚時，交聯度低于20%（摩爾交聯度）成球效果就變差；良溶劑甲苯、鄰苯二甲酸二甲脂為致孔劑得到凝膠型樹脂；甲苯－液臘混合致孔劑得到大孔型樹脂。是什么意思？ 待解決
 懸賞分：1
- 離問題結束還有
交聯度越低（摩爾交聯度低于10%），DMAEMA的共聚成球性能越差，甚至得不到球形樹脂。致孔劑對樹脂制備亦有很大影響，在無致孔劑時，DMAEMA與TRIM共聚時，交聯度低于20%（摩爾交聯度）成球效果就變差；良溶劑甲苯、鄰苯二甲酸二甲脂為致孔劑得到凝膠型樹脂；甲苯－液臘混合致孔劑得到大孔型樹脂。
問題補充： |
|
2013-05-23 12:21:38
The degree of crosslinking, the lower (the molar degree of crosslinking is less than 10%), dmaema copolymer into a ball the worse performance, even without spherical resin. Porogen preparation also have a great impact on the resin, no porogen dmaema trim copolymer, the degree of crosslinking is less
|
|
2013-05-23 12:23:18
To the degree the lower (Moore to the low 10 per cent) in the copolymer, DMAEMA worse performance in a ball, do not even have ball-type resin. The hole is also produced in the resin have a big impact, in a hole, line, and TRIM DMAEMA came together, to the low 20 percent (Moore) to the ball as it was
|
|
2013-05-23 12:24:58
The degree of cross linking is lower (a mole of degree of cross linking to be lower than 10%), the DMAEMA copolymerization becomes the ball performance to be worse, even cannot obtain the sphere resin.Sends Kong Ji also to have the very tremendous influence to the resin preparation, in not sends Kon
|
|
2013-05-23 12:26:38
Lower the cross-linking degree (Republic of Crosslinking degree lower than 10%), pelletizing properties of copolymers of DMAEMA worse, even are not spherical resin. To hole agent on resin preparation also has is large effect, in no to hole agent Shi, DMAEMA and TRIM copolymer Shi, cross joint of bel
|
|
2013-05-23 12:28:18
正在翻譯，請等待...
|
湖北省互聯網違法和不良信息舉報平臺 | 網上有害信息舉報專區 | 電信詐騙舉報專區 | 涉歷史虛無主義有害信息舉報專區 | 涉企侵權舉報專區
