|
關注：1
2013-05-23 12:21
求翻譯：另外，對接收天線的各光學元件的裝配誤差進行了分析，發現光學接收天線的成像質量對次鏡的裝配誤差最為敏感，要求次鏡裝配時軸向加工精度要求為10μm，次鏡偏心誤差不能超過10μm。當次鏡的偏心誤差達到50μm時，光斑直徑增加了1.6μm，而軸向裝配誤差的影響相對小的多，具體可見第三章的公差分析。是什么意思？ 待解決
 懸賞分：1
- 離問題結束還有
另外，對接收天線的各光學元件的裝配誤差進行了分析，發現光學接收天線的成像質量對次鏡的裝配誤差最為敏感，要求次鏡裝配時軸向加工精度要求為10μm，次鏡偏心誤差不能超過10μm。當次鏡的偏心誤差達到50μm時，光斑直徑增加了1.6μm，而軸向裝配誤差的影響相對小的多，具體可見第三章的公差分析。
問題補充： |
|
2013-05-23 12:21:38
In addition, the receiving antenna assembly errors of optical components and found the image quality of the optical receiving antenna is most sensitive to the secondary mirror assembly errors, to the secondary mirror assembly of axial machining accuracy of 10μm, the eccentric error of the secondary
|
|
2013-05-23 12:23:18
In addition, the receiving antenna to the optics assembly errors, and found that the analysis of the optical receiver antenna imaging quality of the mirror assembly errors, most sensitive mirror assembly is called axial processing accuracy requirements of 10 μm, the second mirror offset error can no
|
|
2013-05-23 12:24:58
Moreover, has carried on the analysis to the receiving antenna various optics part installation error, discovered optics receiving antenna the image formation quality is most sensitive to the inferior mirror installation error, requests the inferior mirror assembles when the axial processing precisi
|
|
2013-05-23 12:26:38
In addition, on receiving antenna conducted an analysis of Assembly variation for each optical component, image quality of optical receiving antenna found on most sensitive lens Assembly error, requires secondary mirror Assembly axial accuracy requirement is 10 μ m, secondary mirror eccentricity err
|
|
2013-05-23 12:28:18
|
湖北省互聯網違法和不良信息舉報平臺 | 網上有害信息舉報專區 | 電信詐騙舉報專區 | 涉歷史虛無主義有害信息舉報專區 | 涉企侵權舉報專區
