|
關注：1
2013-05-23 12:21
求翻譯：防爆馬達和控制面板應符合危險場所1區（Class I, Division 1），（外殼Ex d IIB T4），型式檢定認證標誌（以下簡稱為"CTS"標章，請參見 Dwg.1）應該附著在每一個馬達和控制面板的表面。是什么意思？ 待解決
 懸賞分：1
- 離問題結束還有
防爆馬達和控制面板應符合危險場所1區（Class I, Division 1），（外殼Ex d IIB T4），型式檢定認證標誌（以下簡稱為"CTS"標章，請參見 Dwg.1）應該附著在每一個馬達和控制面板的表面。
問題補充： |
|
2013-05-23 12:21:38
Explosion-proof motor and control panel should be consistent with a dangerous place (class i, division 1), (shell ex d iib t4), type test certification mark (hereinafter referred to as "cts" mark, see dwg.1) should be attached to the surface of each motor and control panel.
|
|
2013-05-23 12:23:18
正在翻譯，請等待...
|
|
2013-05-23 12:24:58
Guards against explosions the motor and the control panel should conform to the dangerous place 1 area (Class I, Division 1), (outer covering Ex d IIB T4), the pattern examination authentication symbol (below Jian Chengwei " CTS the " marker, please see also Dwg.1) to be supposed to adhere to stick
|
|
2013-05-23 12:26:38
Explosion-proof motor and control panel should comply with the hazardous areas zone 1 (Class I, Division 1), (Ex d IIB T4 shell), type rating certification mark (hereinafter referred to as "CTS", see Dwg.1) should be attached to the surface of each motor and the control panel.
|
|
2013-05-23 12:28:18
正在翻譯，請等待...
|
湖北省互聯網違法和不良信息舉報平臺 | 網上有害信息舉報專區 | 電信詐騙舉報專區 | 涉歷史虛無主義有害信息舉報專區 | 涉企侵權舉報專區
