|
關注：1
2013-05-23 12:21
求翻譯：本文針對直井、定向井、斜井等中采取有桿泵采油作業時，由于抽油桿屈曲以及井眼彎曲導致抽油桿嚴重偏磨的問題，通過ANSYS軟件對三維彎曲狀態下的全井抽油桿管組合進行建模以及有限元模擬。采用有限元分析對抽油桿與油管壁接觸的位置、接觸量等參數進行預估，以便于進行磨損分析，并在此基礎上有目的地強化防偏磨優化設計，提高采油作業的安全性。是什么意思？ 待解決
 懸賞分：1
- 離問題結束還有
本文針對直井、定向井、斜井等中采取有桿泵采油作業時，由于抽油桿屈曲以及井眼彎曲導致抽油桿嚴重偏磨的問題，通過ANSYS軟件對三維彎曲狀態下的全井抽油桿管組合進行建模以及有限元模擬。采用有限元分析對抽油桿與油管壁接觸的位置、接觸量等參數進行預估，以便于進行磨損分析，并在此基礎上有目的地強化防偏磨優化設計，提高采油作業的安全性。
問題補充： |
|
2013-05-23 12:21:38
正在翻譯，請等待...
|
|
2013-05-23 12:23:18
Well, this document has been directed in such as wells, talked to a rod pump oil extraction job, since the oil boom buckling, as well as bent wellbore result in moderately severe rod grinding oil, through ANSYS software for 3D bent of the wells pumping tube combo for the modeling and finite element
|
|
2013-05-23 12:24:58
This article in view of the vertical shaft, the directional well, the slant hole in and so on adopts when has the pole pump extraction work, because the oil extraction rod flexure as well as the bore hole curving cause the oil extraction rod serious lopsided wear the question, carries on the modelli
|
|
2013-05-23 12:26:38
For inclined shaft of straight wells, well, in this article, taken in Rod pump production job, due to buckling and well bent Rod issues that are causing severe eccentric wear of sucker rod, by ANSYS software on three-dimensional bending State full of sucker rod and tubing combination modeling and fi
|
|
2013-05-23 12:28:18
正在翻譯，請等待...
|
湖北省互聯網違法和不良信息舉報平臺 | 網上有害信息舉報專區 | 電信詐騙舉報專區 | 涉歷史虛無主義有害信息舉報專區 | 涉企侵權舉報專區
