|
關注：1
2013-05-23 12:21
求翻譯：（1）在處理金屬Al模板時，以PS球完全熔化而不影響金屬模板的為目的，溫度過低，則PS球無法完全熔化；溫度過高，則影響Al顆粒在模板上的排列，最佳溫度為500℃是什么意思？ 待解決
 懸賞分：1
- 離問題結束還有
（1）在處理金屬Al模板時，以PS球完全熔化而不影響金屬模板的為目的，溫度過低，則PS球無法完全熔化；溫度過高，則影響Al顆粒在模板上的排列，最佳溫度為500℃
問題補充： |
|
2013-05-23 12:21:38
(1) metal al template ps ball completely melted without affecting the metal template for the purpose, the temperature is too low, ps ball can not be completely melted; the temperature is too high, the impact of al particles are arranged in the template, the most good temperature of 500 ° C
|
|
2013-05-23 12:23:18
(1) in dealing with metal Al template to PS ball completely melted and do not affect highly praised the board for the purpose, the temperature is low, PS ball could not be completely melted; the temperature is too high, affecting Al particles on the template in the list, the best temperature to 500°
|
|
2013-05-23 12:24:58
(1) when processing metal Al template, but completely melts take the PS ball does not affect the metal model as the goal, the temperature excessively is low, then the PS ball is unable to melt completely; Hyperpyrexia, then affects the Al pellet on template arrangement, optimum temperature for 500℃
|
|
2013-05-23 12:26:38
(1) when dealing with Al metal template, PS ball completely melts and does not affect the metal template for the purpose of, the temperature is too low, PS ball is not fully melted; temperature is too high, then Al particles arranged on the template, the best temperature of 500 ° c
|
|
2013-05-23 12:28:18
正在翻譯，請等待...
|
湖北省互聯網違法和不良信息舉報平臺 | 網上有害信息舉報專區 | 電信詐騙舉報專區 | 涉歷史虛無主義有害信息舉報專區 | 涉企侵權舉報專區
