|
關注：1
2013-05-23 12:21
求翻譯：Fault phenomena D could be caused by the following reasons: (1) shut off valve is locked in closed position; (2) valve jamming in the closed position; (3) air supply pressure is not enough. Shutoff valve locked in the closed position, can be manually unlock. Caused by the valve jamming of the main reasons are: wear of 是什么意思？ 待解決
 懸賞分：1
- 離問題結束還有
Fault phenomena D could be caused by the following reasons: (1) shut off valve is locked in closed position; (2) valve jamming in the closed position; (3) air supply pressure is not enough. Shutoff valve locked in the closed position, can be manually unlock. Caused by the valve jamming of the main reasons are: wear of
問題補充： |
|
2013-05-23 12:21:38
D可以由以下原因造成的故障現象：（1）關閉閥門鎖??定在關閉位置;（2）閥門在關閉位置干擾;（3）供氣壓力是不夠的。截止閥鎖定在關閉位置，可以手動解鎖。閥干擾造成的主要原因是：穿閥傳動軸，軸端松自鎖螺母，彈簧斷裂，位置指示器開關損壞。供氣壓力是不夠的防冰閥門管接頭，燃氣泄漏，外部控制閥管氣體泄漏，先進的閥門故障或先進的閥門鎖定在關閉位置，閥門控制器出現故障，可以通過管道測試排除泄漏引氣系統的運行測試和壓力檢查。
|
|
2013-05-23 12:23:18
故障現象d可能是由以下原因引起:(1)截止閥已被鎖定在關閉位置;(2)閥卡在關閉位置;(3)供氣壓力是不夠的。 關斷閥鎖定在關閉位置時,可以手動解除鎖定。 造成的干擾的閥的主要理由是:磨損的閥門驅動軸,軸端松動自鎖螺母,春假,位置指示開關是否損壞。
|
|
2013-05-23 12:24:58
缺點現象D能由以下原
|
|
2013-05-23 12:26:38
正在翻譯，請等待...
|
|
2013-05-23 12:28:18
|
湖北省互聯網違法和不良信息舉報平臺 | 網上有害信息舉報專區 | 電信詐騙舉報專區 | 涉歷史虛無主義有害信息舉報專區 | 涉企侵權舉報專區
