|
關注：1
2013-05-23 12:21
求翻譯：按零件圖要求鉆出4-M12的底孔與?25，深20mm的圓孔;直徑偏差±0.6mm，是什么意思？ 待解決
 懸賞分：1
- 離問題結束還有
按零件圖要求鉆出4-M12的底孔與?25，深20mm的圓孔;直徑偏差±0.6mm，
問題補充： |
|
2013-05-23 12:21:38
Drilled a 4-m12 bottom outlet with ? 25, part drawing deep the hole 20mm; diameter deviation of ± 0.6mm.
|
|
2013-05-23 12:23:18
The requirements in part 4 - M drilled out 12 OF THE 25 holes and ?, 20 mm; diameter hole deviation of ±0.6 mm,
|
|
2013-05-23 12:24:58
Drills 4-M12 according to the detail drawing request the bottom hole and ?25, deep 20mm round hole; Diameter deviation ±0.6mm,
|
|
2013-05-23 12:26:38
According to the parts diagram requires drilling holes at the end of the 4-M12 and ? 25, deep round hole 20mm; diameter deviation ± 0.6mm,
|
|
2013-05-23 12:28:18
正在翻譯，請等待...
|
湖北省互聯網違法和不良信息舉報平臺 | 網上有害信息舉報專區 | 電信詐騙舉報專區 | 涉歷史虛無主義有害信息舉報專區 | 涉企侵權舉報專區
