|
關注：1
2013-05-23 12:21
求翻譯：當其它焊接參數一定時，改變攪拌頭的下壓量為0.4~0.8mm，焊接接頭的抗剪切力隨著下壓量的增加先是逐漸增大，在0.7mm時達到最大值為4.448KN是什么意思？ 待解決
 懸賞分：1
- 離問題結束還有
當其它焊接參數一定時，改變攪拌頭的下壓量為0.4~0.8mm，焊接接頭的抗剪切力隨著下壓量的增加先是逐漸增大，在0.7mm時達到最大值為4.448KN
問題補充： |
|
2013-05-23 12:21:38
The other welding parameters must change the amount of pressure mixing head is 0.4 ~ 0.8mm, welded joints, shear bond strength with increasing amount of pressure is first gradually increasing in 0.7mm maximum 4.448kn
|
|
2013-05-23 12:23:18
When the other welding parameters, change the timing of the mixing head pressure of 0.4 to 0.8 mm, and the solder joint shear resistance as the pressure is increased to gradually increase in 0.7 mm, the maximum value is 4.448 KN
|
|
2013-05-23 12:24:58
When other welding parameter certain, change agitation head under presses the quantity is 0.4~0.8mm, the weld joint anti-shearing force presses the quantity along with under the increase is first increases gradually, when 0.7mm the maximizing is 4.448KN
|
|
2013-05-23 12:26:38
When the other welding parameters when you must, change PIN under the pressure of 0.4~0.8mm, resistance of welded joints under shear stress along with the increase in pressure increases, when 0.7mm reaches the maximum value of 4.448KN
|
|
2013-05-23 12:28:18
正在翻譯，請等待...
|
湖北省互聯網違法和不良信息舉報平臺 | 網上有害信息舉報專區 | 電信詐騙舉報專區 | 涉歷史虛無主義有害信息舉報專區 | 涉企侵權舉報專區
