|
關注：1
2013-05-23 12:21
求翻譯：在退刀前還有回程運動，使鏜桿與工件為同軸，這樣就可以避免在退刀時刀具拉傷已經加工過的表面。是什么意思？ 待解決
 懸賞分：1
- 離問題結束還有
在退刀前還有回程運動，使鏜桿與工件為同軸，這樣就可以避免在退刀時刀具拉傷已經加工過的表面。
問題補充： |
|
2013-05-23 12:21:38
Before retracting the return movement, the boring bar and the workpiece is coaxial to avoid retracting tool strain has been processed surface.
|
|
2013-05-23 12:23:18
In the knife before there is movement, return to the workpiece to boring bar for the same axis, so that you can avoid the injury when the tool has already been processed.
|
|
2013-05-23 12:24:58
In draws back in front of the knife also to have the return trip movement, causes the boring rod and the work piece for coaxial, like this might avoid when drawing back knife the cutting tool pulling injury has already processed the surface.
|
|
2013-05-23 12:26:38
Retract before the return movement, boring bar and work for the same axis, so that you can avoid the retract surface of already processed by the tool when pulled.
|
|
2013-05-23 12:28:18
正在翻譯，請等待...
|
湖北省互聯網違法和不良信息舉報平臺 | 網上有害信息舉報專區 | 電信詐騙舉報專區 | 涉歷史虛無主義有害信息舉報專區 | 涉企侵權舉報專區
