|
關注:1
2013-05-23 12:21
求翻譯:Since the initial position is given the same for all nodes, same amount of control currents are produced for each bearing. Depending on that, shaft has a symmetric movement around its geometric centre. Last 2 nodes track the same trajectory as of the first 2 nodes. Moving away from the b是什么意思?![]() ![]() Since the initial position is given the same for all nodes, same amount of control currents are produced for each bearing. Depending on that, shaft has a symmetric movement around its geometric centre. Last 2 nodes track the same trajectory as of the first 2 nodes. Moving away from the b
問題補充: |
|
2013-05-23 12:21:38
自初始位置的所有節點,每個軸承生產相同數量的控制電流相同。根據該軸圍繞其幾何中心對稱移動的。最后2個節點跟蹤相同的軌跡,作為第2個節點。從軸承降低了節點的控制軌跡控制的效果時,使用相同的加權值。
|
|
2013-05-23 12:23:18
自初始位置是一樣的,所有節點上,相同數量的控制電流是產生了對于每個軸承。 這取決于在這一點上,有一個對稱軸移動的情況下,在幾何中心。 最后一個2個節點的同一軌跡跟蹤的第一2個節點。 遠離軸承的跌幅的控制效果的con-藥劑時的軌跡節點使用相同的權重值。
|
|
2013-05-23 12:24:58
因為給最初的位置同樣為所有結,相同數量控制潮流為每軸承導致。 根據那,軸有相稱運動
|
|
2013-05-23 12:26:38
由于初始位置是相同的所有節點,每個軸承生產相同數量的控制電流。關于這一點,根據軸具有對稱運動的發展及其幾何中心周圍。最后 2 個節點跟蹤第一次 2 節點作為同一的軌跡。移動遠離軸承降低的節點的 con 管控軌跡控制的影響,所有使用相同的權重值時。
|
|
2013-05-23 12:28:18
|
湖北省互聯網違法和不良信息舉報平臺 | 網上有害信息舉報專區 | 電信詐騙舉報專區 | 涉歷史虛無主義有害信息舉報專區 | 涉企侵權舉報專區