|
關注：1
2013-05-23 12:21
求翻譯：為了施加不同的材料模型，對彈簧的殘余應力進行了檢測，檢測位置如圖1所示。表1是某試件殘余應力的檢測結果，根據表1的殘余應力檢測結果，設計不同小的區域的材料模型參數。由于噴丸與強壓處理，材料在各個區域的殘余應力的形式以及大小有較大的差別。根據表1的檢測結果可知，殘余應力基本上都是壓應力。考慮彈簧變形過程中，材料若為單向應力，則總應力為變形產生的應力與殘余應力的合成，其應力與應變關系如式（3）所示。是什么意思？ 待解決
 懸賞分：1
- 離問題結束還有
為了施加不同的材料模型，對彈簧的殘余應力進行了檢測，檢測位置如圖1所示。表1是某試件殘余應力的檢測結果，根據表1的殘余應力檢測結果，設計不同小的區域的材料模型參數。由于噴丸與強壓處理，材料在各個區域的殘余應力的形式以及大小有較大的差別。根據表1的檢測結果可知，殘余應力基本上都是壓應力。考慮彈簧變形過程中，材料若為單向應力，則總應力為變形產生的應力與殘余應力的合成，其應力與應變關系如式（3）所示。
問題補充： |
|
2013-05-23 12:21:38
To impose different material models, the residual stress of the spring testing, to detect the location shown in Figure 1. Table 1 is a specimen test results of the residual stress and residual stress test results in Table 1, the design of different small area of ??the material model parameters. Due
|
|
2013-05-23 12:23:18
In order to exert different kinds of material models in the spring, the residual stress tests that position as shown in Figure 1. Table 1 is a test specimen of residual stress test results, according to Table 1 of the residual stress test results, the design of different small areas of the material
|
|
2013-05-23 12:24:58
In order to exert the different material model, has carried on the examination to the spring residual stress, examines position as shown in Figure 1.Table 1 is some test sample residual stress examination result, according to Table 1 residual stress examination result, design different small region
|
|
2013-05-23 12:26:38
In order to impose a different material models, on residual stress measurement of spring, testing location as shown in Figure 1. Table 1 is a specimen of residual stress test results, according to table 1 of residual stress measurement results, design materials models parameters in different regions
|
|
2013-05-23 12:28:18
正在翻譯，請等待...
|
湖北省互聯網違法和不良信息舉報平臺 | 網上有害信息舉報專區 | 電信詐騙舉報專區 | 涉歷史虛無主義有害信息舉報專區 | 涉企侵權舉報專區
