|
關注:1
2013-05-23 12:21
求翻譯:發射電路中的軟件是按所給的要求計算頻率控制字,并將其送到頻率控制字寄存器中。重點介紹控制字傳送模塊,由于采用總線并行加載方式,控制字傳送實現簡單,其傳送子程序如圖4所示:是什么意思?![]() ![]() 發射電路中的軟件是按所給的要求計算頻率控制字,并將其送到頻率控制字寄存器中。重點介紹控制字傳送模塊,由于采用總線并行加載方式,控制字傳送實現簡單,其傳送子程序如圖4所示:
問題補充: |
|
2013-05-23 12:21:38
The transmitter software is calculated according to the requirements given in the frequency control word, and sent to the frequency control word register. Transmission module focuses on the control word, the use of the bus load in parallel mode, the control word transfer is simple and its transfer s
|
|
2013-05-23 12:23:18
In the firing circuit software is based on the frequency control Word to the call for the calculation, and delivered them to frequency control characters in the register. Focus on transmission control words, as a result of the application modules loaded bus parallel transmission control words, simpl
|
|
2013-05-23 12:24:58
In the transmission circuit software is the request computation frequency control word which presses gives, and delivers it in the frequency control word register.Key introduction control word transmission module, because selects the main line parallel load method, the control word transmission real
|
|
2013-05-23 12:26:38
Transmitter software is calculated in accordance with the requirements given in frequency control word, frequency control word register and send it to. Focuses on controlling transmit module, thanks to parallel bus loading, control word delivered for simple, delivered subprograms as shown in Figure
|
|
2013-05-23 12:28:18
Launch software in circuit to calculate frequency control word according to requirement not given, and send it to frequency and control in the register of the word. The key introduction controls words to convey the module, because of adopting the bus to load the way in parallel, control words to con
|
湖北省互聯網違法和不良信息舉報平臺 | 網上有害信息舉報專區 | 電信詐騙舉報專區 | 涉歷史虛無主義有害信息舉報專區 | 涉企侵權舉報專區