|
關注:1
2013-05-23 12:21
求翻譯:用調節螺釘粗調絞纜機的工作位置,打開軸承蓋,用塞尺檢查絞纜機軸承間隙,使同一臺絞纜機的左右兩軸承的徑向間隙均勻,并符合設備對間隙的要求。是什么意思?![]() ![]() 用調節螺釘粗調絞纜機的工作位置,打開軸承蓋,用塞尺檢查絞纜機軸承間隙,使同一臺絞纜機的左右兩軸承的徑向間隙均勻,并符合設備對間隙的要求。
問題補充: |
|
2013-05-23 12:21:38
Uniform radial clearance of the bearing about the same winch to adjust the position of the screw coarse winch to open the bearing caps, cable cutter bearing clearance with a feeler, and in accordance with the requirements of the equipment gap.
|
|
2013-05-23 12:23:18
With the adjusting screw coarse twisted pair cable is the work location, open bearing cover, with the twisted cable gauge to check the bearing clearance, so that a single twisted pair cable is the right and left of the bearing radial clearance, and evenly with the device of the clearance requirement
|
|
2013-05-23 12:24:58
With the adjusting screw coarse adjustment warping winch working position, opens the bearing cap, with the feeler gauge inspection warping winch bearing gap, causes the identical Taiwan warping winch about two bearing radial clearances to be even, and conforms to the equipment to the gap request.
|
|
2013-05-23 12:26:38
Rough mooring winch with the adjusting screws, open the bearing cover, check mooring winch bearings with clearance gauge clearance, around the same mooring winch two uniform radial clearance of bearings, and meet the equipment requirements for clearance.
|
|
2013-05-23 12:28:18
The plate entangles into a cable machine
|
湖北省互聯網違法和不良信息舉報平臺 | 網上有害信息舉報專區 | 電信詐騙舉報專區 | 涉歷史虛無主義有害信息舉報專區 | 涉企侵權舉報專區