|
關注：1
2013-05-23 12:21
求翻譯：如果介質溫度在100度的溫度，建議采用三元乙丙膠，不僅僅是密封件和墊片，必要時過流件也可以使用此材料。是什么意思？ 待解決
 懸賞分：1
- 離問題結束還有
如果介質溫度在100度的溫度，建議采用三元乙丙膠，不僅僅是密封件和墊片，必要時過流件也可以使用此材料。
問題補充： |
|
2013-05-23 12:21:38
If the medium temperature of 100 degrees of temperature, recommended EPDM rubber, not just the seals and gaskets, if necessary, over-current conditions can also use this material.
|
|
2013-05-23 12:23:18
If the medium at a temperature of 100 degrees Celsius temperature, the recommended $3 B C plastic, not just the seals and gaskets and, if necessary, over-current.You can also use this material.
|
|
2013-05-23 12:24:58
If the medium temperature in 100 degrees temperatures, suggested uses three Yuan second grade third rubber, is not merely the seal and the filling piece, when the necessity the overflow also may use this material.
|
|
2013-05-23 12:26:38
If the medium temperature in 100 degree temperatures, EPDM adhesives are recommended, not just seals and gaskets, parts can also use this material as necessary.
|
|
2013-05-23 12:28:18
If the medium temperature is at 100 degrees of temperatures, propose adopting B third glue of three yuan, it is not merely seal and spacer, crossing one if necessary and flowing can use this material too.
|
湖北省互聯網違法和不良信息舉報平臺 | 網上有害信息舉報專區 | 電信詐騙舉報專區 | 涉歷史虛無主義有害信息舉報專區 | 涉企侵權舉報專區
