|
關注：1
2013-05-23 12:21
求翻譯：針對某型單斗反鏟式液壓挖掘機的工作裝置，利用UG軟件建立了實體模型，并且利用UG軟件進行了運動學和動力學仿真分析，得到了工作裝置中各關節點的坐標和實現挖掘力的限制條件，得到了挖掘機的工作包絡曲線圖、最大卸載高度、最大挖掘半徑和最大挖掘深度，以及各銷軸的受力情況。是什么意思？ 待解決
 懸賞分：1
- 離問題結束還有
針對某型單斗反鏟式液壓挖掘機的工作裝置，利用UG軟件建立了實體模型，并且利用UG軟件進行了運動學和動力學仿真分析，得到了工作裝置中各關節點的坐標和實現挖掘力的限制條件，得到了挖掘機的工作包絡曲線圖、最大卸載高度、最大挖掘半徑和最大挖掘深度，以及各銷軸的受力情況。
問題補充： |
|
2013-05-23 12:21:38
A single bucket for backhoe hydraulic excavator working device, built using UG software entity model, and using UG software for the simulation of kinematics and dynamics, has been working device coordinates of each point and the achievement of joint mining power constraints, has been working envelop
|
|
2013-05-23 12:23:18
In a single-type backhoe hydraulic excavator work UG software installation, use the entity UG software model and use the kinematics and dynamics simulation devices, and has been working in the coordinates of the nodes and achieve digging force of restrictive conditions of work, and has been an excav
|
|
2013-05-23 12:24:58
In view of some only fights the backhoe hydraulic pressure excavator the work installment, has established the full-scale mockup using the UG software, and has carried on the kinematics and dynamics simulation analysis using the UG software, obtained in the work installment various articulares coord
|
|
2013-05-23 12:26:38
For a type single bucket anti-shovel type hydraulic excavator of work device, using UG software established has entity model, and using UG software for has kinematics and dynamics simulation analysis, are has work device in the all joint points of coordinates and implementation mining force of limit
|
|
2013-05-23 12:28:18
|
湖北省互聯網違法和不良信息舉報平臺 | 網上有害信息舉報專區 | 電信詐騙舉報專區 | 涉歷史虛無主義有害信息舉報專區 | 涉企侵權舉報專區
