|
關注：1
2013-05-23 12:21
求翻譯：從示波輸入端口接入被測信號，觀看LCD顯示屏幕（一般情況下，探頭衰減開關應在X10；系統設置為10：1），如出現被測波形，可以按壓F1鍵（自動）使波形穩定下來。是什么意思？ 待解決
 懸賞分：1
- 離問題結束還有
從示波輸入端口接入被測信號，觀看LCD顯示屏幕（一般情況下，探頭衰減開關應在X10；系統設置為10：1），如出現被測波形，可以按壓F1鍵（自動）使波形穩定下來。
問題補充： |
|
2013-05-23 12:21:38
正在翻譯，請等待...
|
|
2013-05-23 12:23:18
From the input port access detected signals and watch LCD display screen (under normal circumstances, should the probe attenuation switch X; system set to 10 10: 1) the detection, such as the case may be squeezing waveforms F 1 type (automatic) Enable waveform stabilized.
|
|
2013-05-23 12:24:58
From shows wave input port turning on to measure the signal, watches the LCD screen (in the ordinary circumstances, the probe head weakens the switch to be supposed in X10; The system establishment is 10:1), if appears is measured the profile, may hold back the F1 key (automatically) to cause wavesh
|
|
2013-05-23 12:26:38
From wave input port access as shown in the measured signal, watch the LCD display screen (under normal circumstances, should probe attenuation in X10; system is set to 10:1), as a result of the measured waveform, you can press the F1 key (auto) waveform stabilized.
|
|
2013-05-23 12:28:18
正在翻譯，請等待...
|
湖北省互聯網違法和不良信息舉報平臺 | 網上有害信息舉報專區 | 電信詐騙舉報專區 | 涉歷史虛無主義有害信息舉報專區 | 涉企侵權舉報專區
