|
關注:1
2013-05-23 12:21
求翻譯:If support span-to-depth ratios greater than 16 to 1 are used such that deflections in excess of 10 % of the support span occur, the stress in the outer surface of the specimen for a simple beam can be reasonably approximated with the following equation是什么意思?![]() ![]() If support span-to-depth ratios greater than 16 to 1 are used such that deflections in excess of 10 % of the support span occur, the stress in the outer surface of the specimen for a simple beam can be reasonably approximated with the following equation
問題補充: |
|
2013-05-23 12:21:38
支撐跨距深入比例大于16至1如果這樣,在超過10%的支持跨度的變形發生,簡支梁的應力在試樣的外表面,可以用下面的公式得到合理的近似
|
|
2013-05-23 12:23:18
如果支持跨度-深入比率是1比16,至於軸承膨脹,使用這種在超過10%的時間內發生的支持,強調在外表面的樣本為一個簡單光束可以合理地接近的公式如下
|
|
2013-05-23 12:24:58
如果支持使用間距對深度比率大于16到1這樣偏折超出10%支持間距發生,重音在標本的外表面為一條簡單的射線可以合理地接近以以下等式
|
|
2013-05-23 12:26:38
如果使用支持跨高比率大于 16 到 1 這樣撓度的超過 10%的支持跨發生,簡支梁的標本的外表面應力可以合理地逼近與下面的等式
|
|
2013-05-23 12:28:18
正在翻譯,請等待...
|
湖北省互聯網違法和不良信息舉報平臺 | 網上有害信息舉報專區 | 電信詐騙舉報專區 | 涉歷史虛無主義有害信息舉報專區 | 涉企侵權舉報專區