|
關注：1
2013-05-23 12:21
求翻譯：本文基于實際鋼結構工程（中心支撐—鋼框架結構）的支撐與梁柱節點模型，對支撐與梁相交節點域進行有限元分析。通過比較梁端彎矩、梁端剪力、支撐桿端擴散角、支撐與柱夾角等參數對支撐與梁相交節點域剪應力的影響，建立了節點域剪應力的計算公式，并提出相應的設計建議，從而為此類支撐與框架連接的支撐節點設計提供參考。是什么意思？ 待解決
 懸賞分：1
- 離問題結束還有
本文基于實際鋼結構工程（中心支撐—鋼框架結構）的支撐與梁柱節點模型，對支撐與梁相交節點域進行有限元分析。通過比較梁端彎矩、梁端剪力、支撐桿端擴散角、支撐與柱夾角等參數對支撐與梁相交節點域剪應力的影響，建立了節點域剪應力的計算公式，并提出相應的設計建議，從而為此類支撐與框架連接的支撐節點設計提供參考。
問題補充： |
|
2013-05-23 12:21:38
Based on the actual steel construction (center support - steel frame structure) support the model with the beam-column joints, the support beams intersect node domain with finite element analysis. By comparing the beam bending moment, shear beam, rod-side diffusion angle, angle of support and column
|
|
2013-05-23 12:23:18
This article is based on actual steel structure engineering support - steel framework (center) as a support structure and Mr Leung Chu-node model, where it intersects with Mr LEUNG to sustain node domain for finite element analysis. Mr Leung ends by comparing torque curve, Leung-end shear and suppor
|
|
2013-05-23 12:24:58
This article based on actual steel structure project (central support - steel portal frame construction) the support and the beam column node model, to support intersect the node territory with Liang to carry on the finite element analysis.Through compares the Liang end moment, the Liang end shear,
|
|
2013-05-23 12:26:38
This article is based on the actual steel structure project (central support-steel frame) model of support and beam-column joints, supports and beams intersect Panel zone FEM analysis. Through comparison of beam bending moment, beam shear, supporting rod end diffusion angles, support and column para
|
|
2013-05-23 12:28:18
|
湖北省互聯網違法和不良信息舉報平臺 | 網上有害信息舉報專區 | 電信詐騙舉報專區 | 涉歷史虛無主義有害信息舉報專區 | 涉企侵權舉報專區
