|
關注：1
2013-05-23 12:21
求翻譯：它是將工件加熱至奧氏體化或部分奧氏體化的溫度，然后以大于臨界冷卻速度冷到Ms點以下，使鋼發生馬氏體變化。是什么意思？ 待解決
 懸賞分：1
- 離問題結束還有
它是將工件加熱至奧氏體化或部分奧氏體化的溫度，然后以大于臨界冷卻速度冷到Ms點以下，使鋼發生馬氏體變化。
問題補充： |
|
2013-05-23 12:21:38
It is heated to austenitizing the workpiece or part of the austenitizing temperature is greater than the critical cooling rate and then cooled to below the Ms, the steel martensite changes occur.
|
|
2013-05-23 12:23:18
It is heated up to the workpiece austenitic stainless steel austenitic stainless steel, or part of the temperature, and then a greater than critical cooling rate Ms points to the cold steel ferritic changes occur.
|
|
2013-05-23 12:24:58
It is the work piece heating to austenized or the part austenization temperature, then is bigger than the critical cooling rate as coldly as Ms below, causes the steel to have the martensite change.
|
|
2013-05-23 12:26:38
It is the workpiece heating into the ranks of austenitic or part of austenite temperature, followed by critical cooling rate is greater than the cold to the Ms points so that martensite changes in steel.
|
|
2013-05-23 12:28:18
It is heated to austenitizing the workpiece or part of the austenitizing temperature is greater than the critical cooling rate and then cooled to below the Ms, the steel martensite changes occur.
|
湖北省互聯網違法和不良信息舉報平臺 | 網上有害信息舉報專區 | 電信詐騙舉報專區 | 涉歷史虛無主義有害信息舉報專區 | 涉企侵權舉報專區
