|
關注：1
2013-05-23 12:21
求翻譯：用硬手動操作輸出，使輸出表指示在0%、50%、100%時，輸出電流應分別為4、12、20mA，允許誤差為±3%；是什么意思？ 待解決
 懸賞分：1
- 離問題結束還有
用硬手動操作輸出，使輸出表指示在0%、50%、100%時，輸出電流應分別為4、12、20mA，允許誤差為±3%；
問題補充： |
|
2013-05-23 12:21:38
With hard manual output, the output table indicates 0%, 50%, 100%, respectively, the output current should 4,12,20 mA, permissible error of ± 3%;
|
|
2013-05-23 12:23:18
Using Hard-operated manually output that allows the output table instructions at 0 %, 50 %, 100 %, output current of 4, 12, 20, mA is ± 3 %;
|
|
2013-05-23 12:24:58
With the hard manual operation output, causes the output meter instruction when 0%, 50%, 100%, the output current should respectively be 4, 12, 20mA, the allowance error is ±3%;
|
|
2013-05-23 12:26:38
With the hard manual output, output table indicates, 0%, 100%, output current should be respectively 4, 12, 20mA, permissible error of ± 3%;
|
|
2013-05-23 12:28:18
With the hard manual output, output table indicates, 0%, 100%, output current should be respectively 4, 12, 20mA, permissible error of ± 3%;
|
湖北省互聯網違法和不良信息舉報平臺 | 網上有害信息舉報專區 | 電信詐騙舉報專區 | 涉歷史虛無主義有害信息舉報專區 | 涉企侵權舉報專區
