|
關注：1
2013-05-23 12:21
求翻譯：由于該瑕疵是在高周波壓合的時候產生的問題，所以建議工廠修改高周波模具，壓面改成圓弧狀或者作倒角是什么意思？ 待解決
 懸賞分：1
- 離問題結束還有
由于該瑕疵是在高周波壓合的時候產生的問題，所以建議工廠修改高周波模具，壓面改成圓弧狀或者作倒角
問題補充： |
|
2013-05-23 12:21:38
Because the flaw is in the high frequency voltage generated when the problem together, it is proposed to modify frequency mold factory, into a circular shape or surface pressure for the chamfer
|
|
2013-05-23 12:23:18
Because of the flaws in the high-frequency wave is generated by the time compression, it is suggested that factory modified koshuha mold, and pressure-oriented underlain or changed to a point
|
|
2013-05-23 12:24:58
Because this slight defect is press fits in the high frequency time produces question, therefore suggested the factory revision high frequency mold, the compression face alters to the circular arc shape or makes the bevel edge
|
|
2013-05-23 12:26:38
Because the flaw was in the high frequency pressure-when the issues raised, it is recommended that high frequency mould factory modified, pressed into circular-arc or chamfer
|
|
2013-05-23 12:28:18
Because the flaw was in the high frequency pressure-when the issues raised, it is recommended that high frequency mould factory modified, pressed into circular-arc or chamfer
|
湖北省互聯網違法和不良信息舉報平臺 | 網上有害信息舉報專區 | 電信詐騙舉報專區 | 涉歷史虛無主義有害信息舉報專區 | 涉企侵權舉報專區
