|
關注：1
2013-05-23 12:21
求翻譯：零件倒角不均勻的原因是倒角時定位銷磨損與零件配合有間隙使零件竄動，造成零件倒角不均勻。是什么意思？ 待解決
 懸賞分：1
- 離問題結束還有
零件倒角不均勻的原因是倒角時定位銷磨損與零件配合有間隙使零件竄動，造成零件倒角不均勻。
問題補充： |
|
2013-05-23 12:21:38
Part because of uneven chamfer chamfer wear pins with a gap with the parts ran out parts, resulting in uneven parts chamfer.
|
|
2013-05-23 12:23:18
Spare parts arrissing uneven reasons when it is knocked down point positioning marketing wear parts tie in with a gap with the spare parts tamper interactive, causing parts arrissing uneven.
|
|
2013-05-23 12:24:58
The components bevel edge non-uniform reason is when a bevel edge the positioning pin attrition and the components coordinate to have the gap to cause the components to flee move, create the components bevel edge to be non-uniform.
|
|
2013-05-23 12:26:38
Uneven because chamfering of parts chamfered PIN when you make parts Hunt wear and tear parts fit clearances, chamfering of parts caused uneven.
|
|
2013-05-23 12:28:18
Uneven because chamfering of parts chamfered PIN when you make parts Hunt wear and tear parts fit clearances, chamfering of parts caused uneven.
|
湖北省互聯網違法和不良信息舉報平臺 | 網上有害信息舉報專區 | 電信詐騙舉報專區 | 涉歷史虛無主義有害信息舉報專區 | 涉企侵權舉報專區
