|
關注：1
2013-05-23 12:21
求翻譯：在調節進給時必須首先調節好軸承室端限位螺釘M16×90及螺母M16進給限位位置是什么意思？ 待解決
 懸賞分：1
- 離問題結束還有
在調節進給時必須首先調節好軸承室端限位螺釘M16×90及螺母M16進給限位位置
問題補充： |
|
2013-05-23 12:21:38
In the regulation of feed must first regulate the bearing housing end limit screw and nut M16 × 90 M16 into position to limit
|
|
2013-05-23 12:23:18
In the regulation to further regulate bearings must end room open limit screw nut M M 16 x 90 and 16 bit positions to give limited
|
|
2013-05-23 12:24:58
When adjustment to feed must first adjust the good bearing room end spacing bolt M16×90 and the nut M16 to feed spacing position
|
|
2013-05-23 12:26:38
In regulating feeding must first adjust the bearing housing ends when M16x90 limit screw and nut M16 feed limit location
|
|
2013-05-23 12:28:18
In regulating feeding must first adjust the bearing housing ends when M16x90 limit screw and nut M16 feed limit location
|
湖北省互聯網違法和不良信息舉報平臺 | 網上有害信息舉報專區 | 電信詐騙舉報專區 | 涉歷史虛無主義有害信息舉報專區 | 涉企侵權舉報專區
