|
關注：1
2013-05-23 12:21
求翻譯：盤管過渡圓弧處的彎曲半徑由制造工藝決定，其最小彎曲半徑不得小于 80mm.也可以用彎頭替代是什么意思？ 待解決
 懸賞分：1
- 離問題結束還有
盤管過渡圓弧處的彎曲半徑由制造工藝決定，其最小彎曲半徑不得小于 80mm.也可以用彎頭替代
問題補充： |
|
2013-05-23 12:21:38
Coil transition of the arc at the bend radius determined by the manufacturing process, the minimum bend radius of not less than 80mm. You can also substitute with elbow
|
|
2013-05-23 12:23:18
Coil bending radius of the arc transition from manufacturing processes to determine the minimum bending radius shall not be less than 80mm can also be used elbow replacement .
|
|
2013-05-23 12:24:58
The serpentined transition circular arc place bevelling radius decided by the manufacture craft that, its smallest bevelling radius does not have to be smaller than 80mm. also to be possible to use the bend to substitute
|
|
2013-05-23 12:26:38
-Coil bending radii determined by the manufacturing process of the transition arc, a minimum bend radius not less than 80mm. you can also use elbow replacement
|
|
2013-05-23 12:28:18
-Coil bending radii determined by the manufacturing process of the transition arc, a minimum bend radius not less than 80mm. you can also use elbow replacement
|
湖北省互聯網違法和不良信息舉報平臺 | 網上有害信息舉報專區 | 電信詐騙舉報專區 | 涉歷史虛無主義有害信息舉報專區 | 涉企侵權舉報專區
