|
關注：1
2013-05-23 12:21
求翻譯：盤管過渡圓弧處的彎曲半徑由制造工藝決定，其最小彎曲半徑不得小于 80mm是什么意思？ 待解決
 懸賞分：1
- 離問題結束還有
盤管過渡圓弧處的彎曲半徑由制造工藝決定，其最小彎曲半徑不得小于 80mm
問題補充： |
|
2013-05-23 12:21:38
Coil transition of the arc at the bend radius determined by the manufacturing process, the minimum bend radius of not less than 80mm
|
|
2013-05-23 12:23:18
Coil bending radius of the arc transition from manufacturing processes, decision the minimum bending radius not less than 80 mm
|
|
2013-05-23 12:24:58
The serpentined transition circular arc place bevelling radius decided by the manufacture craft that, its smallest bevelling radius does not have to be smaller than 80mm
|
|
2013-05-23 12:26:38
Coil transition arc of bending radius decided by manufacturing process, its minimum bending radius no less than 80mm
|
|
2013-05-23 12:28:18
-Coil bending radii determined by the manufacturing process of the transition arc, the minimum bending radius shall not be less than 80mm
|
湖北省互聯網違法和不良信息舉報平臺 | 網上有害信息舉報專區 | 電信詐騙舉報專區 | 涉歷史虛無主義有害信息舉報專區 | 涉企侵權舉報專區
