|
關注：1
2013-05-23 12:21
求翻譯：你說的直徑尺寸不一樣，就是直徑是2的實測公差是-0.02，但圖紙是-0.01，對嗎？另外一邊直徑是1,68的沒問題吧，是否我重新給你寄樣品，確認后再生產，還是按圖紙就把產品生產下來是什么意思？ 待解決
 懸賞分：1
- 離問題結束還有
你說的直徑尺寸不一樣，就是直徑是2的實測公差是-0.02，但圖紙是-0.01，對嗎？另外一邊直徑是1,68的沒問題吧，是否我重新給你寄樣品，確認后再生產，還是按圖紙就把產品生產下來
問題補充： |
|
2013-05-23 12:21:38
You say not the same diameter, the diameter is measured tolerance of 2 is -0.02, but the drawings are -0.01, right? Diameter is 1,68 the other side of it no problem, if I re-send you samples to confirm and then production, or put the product down by drawing
|
|
2013-05-23 12:23:18
You have said that the diameter size diameter is not the same, and that is the real measurement tolerances is 2 - 0.02 -0.01 , but drawings is, isn't that right? Another side of diameter is 1, and 68, you ll come back to me whether or not to confirm if you send samples or the drawings produced on th
|
|
2013-05-23 12:24:58
You said the diameter size is dissimilar, is the diameter is 2 actual common differences is - 0.02, but the blueprint is - 0.01, to? Moreover one side the diameter is 1,68 not questions, whether I do send the sample again to you, after confirmed reproduces, presses the blueprint on the product produ
|
|
2013-05-23 12:26:38
You say the diameter dimension is different, is the measured tolerances of a diameter of 2 is-0.02, but drawing was-0.01, right? While diameter is 1,68 I'll whether I sent you samples, confirmed production or by drawing down production
|
|
2013-05-23 12:28:18
You say the diameter dimension is different, is the measured tolerances of a diameter of 2 is-0.02, but drawing was-0.01, right? Other side the diameter is 1,68 is no problem, if I send you samples, confirmed production, or by drawing down production
|
湖北省互聯網違法和不良信息舉報平臺 | 網上有害信息舉報專區 | 電信詐騙舉報專區 | 涉歷史虛無主義有害信息舉報專區 | 涉企侵權舉報專區
