|
關注：1
2013-05-23 12:21
求翻譯：鋼架支撐按設計尺寸在洞外下料分節焊接制作。支撐安裝尺寸允許偏差：橫向和高程為±5cm，垂直度±2°。是什么意思？ 待解決
 懸賞分：1
- 離問題結束還有
鋼架支撐按設計尺寸在洞外下料分節焊接制作。支撐安裝尺寸允許偏差：橫向和高程為±5cm，垂直度±2°。
問題補充： |
|
2013-05-23 12:21:38
Steel frame design dimensions in the hole by cutting a section welding production. Support the installation size to allow deviation: horizontal and elevation of ± 5cm, vertical ± 2 °.
|
|
2013-05-23 12:23:18
steel frame supporting the design size outside welding produced under sub-section information. Supporting installation sizes allow deviation: horizontal and vertical elevation of ± 5cm, ± 2° degrees.
|
|
2013-05-23 12:24:58
Steel frame support according to design size outside hole yummy treats sectionalization welding manufacture.The support installs the size allowable deviation: Crosswise and the elevation is ±5cm, verticality ±2°.
|
|
2013-05-23 12:26:38
Steel frame design size supported by blanking the section outside the hole welding production. Supported installation size tolerances: horizontal and vertical 5cm, vertical ± 2 °.
|
|
2013-05-23 12:28:18
Steel frame support according to design size outside hole yummy treats sectionalization welding manufacture.The support installs the size allowable deviation: Crosswise and the elevation is ±5cm, verticality ±2°.
|
湖北省互聯網違法和不良信息舉報平臺 | 網上有害信息舉報專區 | 電信詐騙舉報專區 | 涉歷史虛無主義有害信息舉報專區 | 涉企侵權舉報專區
