|
關注：1
2013-05-23 12:21
求翻譯：1-3（W4109-W4309）從機器尾部牽拉電機上方墻板的圓孔中穿過（機器前側方向），分別把插頭插到對應的Laser接收器上，從外往里的順序為1,2,3。插頭插好后把插頭和線全都用扎帶扎在事先裝好的元寶座上。多余的線全部鋪入墻板的走線槽，也用扎帶扎好。是什么意思？ 待解決
 懸賞分：1
- 離問題結束還有
1-3（W4109-W4309）從機器尾部牽拉電機上方墻板的圓孔中穿過（機器前側方向），分別把插頭插到對應的Laser接收器上，從外往里的順序為1,2,3。插頭插好后把插頭和線全都用扎帶扎在事先裝好的元寶座上。多余的線全部鋪入墻板的走線槽，也用扎帶扎好。
問題補充： |
|
2013-05-23 12:21:38
1-3 (w4109-w4309) across from the hole in the rear of the machine above the traction motor wallboard (the front side of the machine direction), respectively, to plug into the corresponding laser receiver on the order of the inside from the outside to a , 2, 3. Plug after plug and wire are all using
|
|
2013-05-23 12:23:18
正在翻譯，請等待...
|
|
2013-05-23 12:24:58
|
|
2013-05-23 12:26:38
1-3 (W4109-W4309) from the machine end traction motor above the circular holes through the wall plate (front side of the machine direction), respectively, to the corresponding plug on the Laser receiver, from outside to in order for 1,2,3. When you plug the plug and cord strap tie set in advance for
|
|
2013-05-23 12:28:18
正在翻譯，請等待...
|
湖北省互聯網違法和不良信息舉報平臺 | 網上有害信息舉報專區 | 電信詐騙舉報專區 | 涉歷史虛無主義有害信息舉報專區 | 涉企侵權舉報專區
