The other end of the line with a pipe threading stripped skin, a little longer, the penetration of the junction box and then from the spindle brake junction box below the plastic fittings on the 1st line and the diode sets of heat-shrinkable tube one end of the terminal pressure. on the 2nd line and

Through the tube with the other head stripped, slightly longer, and then from the spindle brake wiring box through the plastic hose into the junction box, line no. 1 and 2 pole tube heat shrink tube with one end of the terminal voltage, line 2, and with grounding wire crimp.

正在翻譯，請等待...

Stuffing tube with decorticate from across the line, slightly longer, and then from the spindle brake junction box below the plastic connector into the junction box, Line 1 line with diode sets of heat shrinkable tubing end terminals voltage is good, Line 2 line and grounding terminals voltage is go

Threads the tube the belt the line another husk, slightly long, then penetrates the connecting box from the main axle brake connecting box following plastic pipe connection, 1 line and a diode pipe socket pyrocondensation tube end presses with the post, 2 lines with meet the grounding to press with