|
關注：1
2013-05-23 12:21
求翻譯：側模采用大塊定型鋼模板，鋼板厚6mm以上，為拆裝方便，模板間采用栓接，模板接頭留在設計橫隔板位置的中間以便于拆模。相對兩側模板采用拉桿連接，上層每隔1.5m一道，下層每隔1.0m一道。側模上焊接上固定俯著式振動器用型鋼，型鋼分上下兩層布置，呈鋸齒型分布，相鄰兩臺間間距為1.5m左右。是什么意思？ 待解決
 懸賞分：1
- 離問題結束還有
側模采用大塊定型鋼模板，鋼板厚6mm以上，為拆裝方便，模板間采用栓接，模板接頭留在設計橫隔板位置的中間以便于拆模。相對兩側模板采用拉桿連接，上層每隔1.5m一道，下層每隔1.0m一道。側模上焊接上固定俯著式振動器用型鋼，型鋼分上下兩層布置，呈鋸齒型分布，相鄰兩臺間間距為1.5m左右。
問題補充： |
|
2013-05-23 12:21:38
Side of the mold using large fixed steel template, more than 6mm thick steel plate for easy accessibility, the use of bolted between the template, the template fitting place to stay in the middle of the diaphragm design to facilitate form removal. Opposite sides of the template using rod connected t
|
|
2013-05-23 12:23:18
正在翻譯，請等待...
|
|
2013-05-23 12:24:58
The side form uses the bulk stereotypia steel die board, above steel thickness of slab 6mm, is disassembling is convenient, between the template uses the bolting, the template attachment keeps the design cross spacer position among to be advantageous for the form removal.Each the relative both sides
|
|
2013-05-23 12:26:38
Side core chunk type steel formwork, steel plate thickness above 6mm, easily reassembled, the templates used to bolt, template headers left over the Middle for easy design of diaphragm location bar mode. Relative side templates using levers connected, upper layer every 1.5m together, underlies every
|
|
2013-05-23 12:28:18
Side of the mold using large fixed steel template, more than 6mm thick steel plate for easy accessibility, the use of bolted between the template, the template fitting place to stay in the middle of the diaphragm design to facilitate form removal. Opposite sides of the template using rod connected t
|
湖北省互聯網違法和不良信息舉報平臺 | 網上有害信息舉報專區 | 電信詐騙舉報專區 | 涉歷史虛無主義有害信息舉報專區 | 涉企侵權舉報專區
