|
關注：1
2013-05-23 12:21
求翻譯：先將卡死的噴油嘴放入柴油或機油內加溫，然后取出用布包住，再用手鉗夾緊針閥并慢慢活動，將針閥從針閥體內取出。將少量清潔機油滴在針閥體內，使針閥在針閥體內反復活動，直至針閥能在針閥體內活動自如。如針閥的密封面有燒傷的痕跡，應當用研磨膏進行研磨。研磨時要注意掌握研磨膏用量和研磨時間。將清洗干凈的鐘閥偶件裝上噴油器，并調整好噴油壓力后即可重新使用。是什么意思？ 待解決
 懸賞分：1
- 離問題結束還有
先將卡死的噴油嘴放入柴油或機油內加溫，然后取出用布包住，再用手鉗夾緊針閥并慢慢活動，將針閥從針閥體內取出。將少量清潔機油滴在針閥體內，使針閥在針閥體內反復活動，直至針閥能在針閥體內活動自如。如針閥的密封面有燒傷的痕跡，應當用研磨膏進行研磨。研磨時要注意掌握研磨膏用量和研磨時間。將清洗干凈的鐘閥偶件裝上噴油器，并調整好噴油壓力后即可重新使用。
問題補充： |
|
2013-05-23 12:21:38
First stuck the nozzle into the diesel or oil within the heat, then remove live with cloth, hand clamp tight the needle valve and activities slowly remove the needle valve from the body of the needle valve. A small amount of clean oil drops in the needle valve body, so that the needle valve needle v
|
|
2013-05-23 12:23:18
You will be stuck in the injector into the diesel or heating oil, and then remove with a cloth, wrapped around by hand vise needle valve and slowly, the needle valve in the valve body. A small amount will be clean the needle valve oil within t
|
|
2013-05-23 12:24:58
|
|
2013-05-23 12:26:38
|
|
2013-05-23 12:28:18
|
湖北省互聯網違法和不良信息舉報平臺 | 網上有害信息舉報專區 | 電信詐騙舉報專區 | 涉歷史虛無主義有害信息舉報專區 | 涉企侵權舉報專區
